We detected your language is . Switch to it? 3s
🇺🇸 English🇨🇳 中文🇪🇸 Español🇫🇷 Français🇵🇹 Português🇩🇪 Deutsch🇦🇪 العربية🇻🇳 Tiếng Việt🇹🇭 ไทย🇲🇾 Bahasa Melayu🇮🇩 Bahasa Indonesia🇮🇳 हिन्दी
WM-5000L6 photo and call online guard tour reader, front view
WM-5000L6 photo and call online guard tour reader, front viewWM-5000L6 online guard tour reader, rear view with the IP67 rating plateWM-5000L6 online guard tour reader with the SIM card compartment openWM-5000L6 online guard tour reader phonebook screenWM-30A RFID checkpoint buttons that mark each patrol pointWM-30A RFID checkpoint button fixed to a post with a single screw, being readWM-226 RFID guard keys (personnel tags) on keyrings, one per guard
OnlineReal-time uploadTwo-way talkWaterproofDustproofShockproof

WM-5000L6 Photo & Call Online Guard Tour System

Online guard tour reader with 5MP camera, call & 3G

The WM-5000L6 merges voice call, SMS, 5MP photo, 3G and RFID reading in one device. Patrol data uploads in real time over 3G/GPRS to the Guard tour management System, while photo and call functions make field reporting and emergency contact instant. Certified for gas and dust explosion protection.

Inquire Now

Are you facing these problems too?

  • Do you have guards on patrol at your site — and any way to prove they actually walked every route?
  • At 2 a.m., is he really patrolling — or asleep in a corner? Without a record, you simply cannot tell.
  • If the data waits until the shift ends, you learn about problems a day late — online uploads arrive while the patrol is still running.

Is this the right system for you?

  • Your site is high value and needs photo and voice evidence during the patrol.
  • The control room must see and reach the guard while he is on the move.
  • You have IT support and can handle SIM cards and a server.

Applications

Oil, Gas & Chemical

Intrinsically safe iButton Guard Tour Readers for zones where RF energy is forbidden.

Factories & Warehouses

Enforce routine equipment and perimeter checks; prove compliance with audit-ready reports.

Utilities, Power & Substations

Enforce inspection rounds on substations, pump houses and remote assets in any weather.

Logistics & Distribution Centers

Secure dock doors, yards and high-value storage through every shift change.

Security Service Companies

Give every client a timestamped patrol record — the proof that renews contracts.

Construction Sites

Guard plant, materials and site perimeter overnight, on sites with no fixed infrastructure.

Data Centers & Telecom

Log temperature, access and equipment rounds in white space and at remote masts with a provable timeline.

Key Features

  • ✓Voice call, SMS, 5MP photo and 3G in one device.
  • ✓Fully waterproof, IP67 with Gorilla-glass screen.
  • ✓Real-time 3G/GPRS data upload.
  • ✓Gas & dust explosion-protection certified.

Specifications

Operating Temperature-40°C ~ +85°C
Protection GradeIP67
Read DistanceContactless RFID
Frequency3G / GPRS

How this guard tour system works

1Shift startThe guard reads his ownguard key to recordidentity and shift starttime.2Patrol the routeAlong the route, the readersenses each checkpoint.Every scan is time-stampedand cannot be forged.3Shift handoverThe incoming guard readshis own guard key — thewhole shift is accountableby name.4Upload & reportsPatrol data uploads in realtime over the mobilenetwork (data SIMrequired). Managers viewroute, time, personnel andevents online.Routine uploads daily or weekly — managers can review patrol history at any time
1
Shift start

The guard reads his own guard key to record identity and shift start time.

2
Patrol the route

Along the route, the reader senses each checkpoint. Every scan is time-stamped and cannot be forged.

3
Shift handover

The incoming guard reads his own guard key — the whole shift is accountable by name.

4
Upload & reports

Patrol data uploads in real time over the mobile network (data SIM required). Managers view route, time, personnel and events online.

What's in the system

One order = a complete working patrol system. Quantities are sized to your site.

Guard Tour ReaderWM-5000L61 per system minimum — usually 2 or more
SIM card with data planGSM data planNot included (customer provides)
Checkpoint buttonsWM-30A/EMAt least 10 per system — usually 50 or more
Guard Keys (personnel buttons)WM-226/EM1 per guard
Guard tour management System1 per system
Incident walletIW08RFOptional — 0, 1 or several

Checkpoint buttons and guard keys

Everything above is the reader and the software. These two parts are what is actually screwed to the wall and carried in a pocket — and they decide whether the records are worth anything.

WM-30A RFID checkpoint button fixed to a post with a single screw, being read
Checkpoint button · WM-30A

RFID checkpoint button

The mark on the wall that each round is proved against. A passive 125 kHz RFID disc — one screw, no battery, nothing to charge or replace.

  • ✓Passive and read-only: no battery, no switch, so nothing goes flat mid-shift.
  • ✓30 mm across, 4 mm thick, fixed by one screw through the centre — a 4 mm hole in the wall, or adhesive where the surface cannot be drilled.
  • ✓Mount it about 1.2 m above the floor and keep it off bare metal — a steel surface detunes the antenna and shortens the read range.
  • ✓Night-glow ring available, so the point is still findable with the torch off.
Frequency125 kHz ± 6 kHz
TypePassive, read-only
Size⌀30 × 4 mm, centre hole ⌀5 mm
Fixing1 screw, 4 mm hole / adhesive
Readsover 1,000,000
Service lifeover 20 years
Temperature-40°C ~ +85°C
Weight2.8 g
OptionsNight-glow / anti-metal version for steel surfaces
WM-226 RFID guard key on a keyring being read by the guard tour reader
Guard key · WM-226

RFID guard key

One per guard. Every round he logs is stamped with this tag — the same route, but now the record says who walked it.

  • ✓Passive 125 kHz tag in a yellow keyring fob: clip it to a belt loop or lanyard, nothing to charge.
  • ✓36 × 28 × 6 mm — small enough to carry all shift without noticing.
  • ✓The serial is fixed in the chip, so one guard cannot lend his key to a colleague and have it read as his own round.
  • ✓Lost or broken? Issue a new key and bind it to the same guard — the checkpoints stay where they are.
Frequency125 kHz
TypePassive, read-only
Size36 × 28 × 6 mm
HousingYellow keyring fob
Weight3.8 g
IDFixed serial, not rewritable

Request a Quotation

Fill in your details and we will reply with pricing and configuration advice.

Fields marked * are required. We respect your privacy. Your information is used only to respond to your inquiry.

Related Products

WM-5000K Wi-Fi two-way talk guard tour reader, front and back view
WM-5000K

Wi-Fi Two-Way Talk Guard Tour System

Real-time Wi-Fi patrol with two-way talk, SOS alarm and live dispatch

OnlineIntercom
View Details
WM-5000L3 online guard tour reader, rugged housing
WM-5000L3

Online Guard Tour System

GPRS real-time guard tour reader, 30 m drop-proof, alarms

Online
View Details
WM-5000L3-MF1 online guard tour reader with MF1 card support
WM-5000L3-MF1

Online Guard Tour System

Online guard tour reader with MF1 card support

Online
View Details
FAQ

Frequently Asked Questions

Practical answers about guard tour readers, selection and deployment.

What does the WM-5000L6 include, and which parts are paid?
The WM-5000L6 is a complete guard tour system: guard tour reader, its data downloader or USB data cable (see the What-is-in-the-system table on this page), checkpoint buttons, guard Keys and the Guard tour management System (Windows) — each quoted as a separate paid item so you buy only what you need. Every reader ships with one carrying pouch and one charger (one per reader; extra pouches or chargers are optional paid accessories), and one data cable per system. Checkpoint buttons are sized per patrol route and guard Keys per guard.
What warranty does the WM-5000L6 come with?
Every JWM guard tour reader includes a 6-year warranty, 24-hour response and free Guard tour management System upgrades.
Can the WM-5000L6 be OEM or custom branded?
Yes. We provide white-label and custom guard tour readers with your logo, firmware and packaging; finished products from 1 unit.
Is the WM-5000L6 waterproof, shockproof and tamper-proof?
Yes. Every JWM reader is sealed against water and dust, rated -40°C to +85°C, and built drop- and tamper-resistant with rubber-jacket and multi-layer silicone cushioning; patrol data is retained for over 20 years. See the Specifications table for each model’s exact rating.
Is the WM-5000L6 in stock, and how fast do you ship?
Yes — regular models are in stock for orders up to 500 sets. We ship within 3 working days after payment via FedEx, DHL or UPS, and delivery takes about 5-8 working days worldwide. Shipments are DDU: the consignee may need to support import clearance and pay import duties. LOGO-customized orders are quoted after we confirm the customization details.
How does the WM-5000L6 upload data in real time?
It sends patrol, location and alarm data to the Guard tour management System over GPRS/3G, enabling live supervision.
Does the WM-5000L6 work without mobile coverage?
It stores records offline and uploads automatically when coverage returns; the Wi-Fi model uploads in real time inside Wi-Fi coverage.
Does the WM-5000L6 need a SIM card or data plan?
The GPRS/3G models need a GSM data plan, which is not included in the system price. The WM-5000K Wi-Fi model uploads over your existing Wi-Fi network and needs no SIM card.
What can the WM-5000L6 do in one device?
Voice call, SMS, 5MP photo capture, 3G/GPRS real-time upload and RFID patrol reading — field reporting and emergency contact happen on the spot.
Is the WM-5000L6 certified for explosive zones?
Yes — gas and dust explosion-protection certified, for oil, gas and chemical sites.
How does the WM-5000L6 upload data?
Real-time over 3G/GPRS to the Guard tour management System; a GSM data plan is required and not included.
What screen does the WM-5000L6 use?
A Gorilla-glass screen in an IP67 housing.