We detected your language is . Switch to it? 3s
🇺🇸 English🇨🇳 中文🇪🇸 Español🇫🇷 Français🇵🇹 Português🇩🇪 Deutsch🇦🇪 العربية🇻🇳 Tiếng Việt🇹🇭 ไทย🇲🇾 Bahasa Melayu🇮🇩 Bahasa Indonesia🇮🇳 हिन्दी
WM-5000V8 2.4G long-range RFID guard tour system with dual-mode guard tour reader
WM-5000V8 2.4G long-range RFID guard tour system with dual-mode guard tour readerWM-226 RFID guard keys (personnel tags) on keyrings, one per guard
RFID2.4G long-rangeWaterproofDustproofShockproofEasy to use

WM-5000V8 2.4G Long-Range RFID Guard Tour System

Dual-mode reader + 2.4G checkpoint buttons readable up to ~30 m

The WM-5000V8 2.4G bundle pairs the dual-mode RFID guard tour reader (125K + 2.4G) with long-range 2.4G checkpoint buttons powered by an 850 mAh cell lasting over 2 years. Checkpoint buttons can be read from up to ~30 m, ideal for gates, yards and vehicle patrol.

Inquire Now

Are you facing these problems too?

  • Do you have guards on patrol at your site — and any way to prove they actually walked every route?
  • At 2 a.m., is he really patrolling — or asleep in a corner? Without a record, you simply cannot tell.
  • Fences and far corners are a long walk away — “I could not reach it” becomes the excuse. Long-range reading logs them from metres off.

Is this the right system for you?

  • Fences and vehicle gates are too far to touch on every round.
  • Remote points tend to be “forgotten” — long-range reading makes that visible.
  • Your weather is cold or wet and taking gloves off to touch tags is slow.

Applications

Logistics & Distribution Centers

Secure dock doors, yards and high-value storage through every shift change.

Factories & Warehouses

Enforce routine equipment and perimeter checks; prove compliance with audit-ready reports.

Construction Sites

Guard plant, materials and site perimeter overnight, on sites with no fixed infrastructure.

Property & Campus Security

Stop "one-tap-many" cheating; hold guards accountable for every post, every shift.

Utilities, Power & Substations

Enforce inspection rounds on substations, pump houses and remote assets in any weather.

Security Service Companies

Give every client a timestamped patrol record — the proof that renews contracts.

Key Features

  • ✓Dual-mode RFID guard tour reader of 125K and 2.4G checkpoint buttons.
  • ✓Long-range 2.4G checkpoint buttons up to ~30 m.
  • ✓Fully waterproof, IP67 sealed housing.
  • ✓HD OLED, flashlight, compass, thermometer.
  • ✓2.4G checkpoint buttons: 850 mAh cell, 2+ years life, outdoor-safe.

Specifications

Operating Temperature-40°C ~ +85°C
BatteryReader + 2.4G checkpoint button
Protection GradeIP67
Read Distance2.4G up to ~30 m

How this guard tour system works

1Shift startThe guard reads his ownguard key to recordidentity and shift starttime.2Patrol the routeAlong the route, the readersenses each checkpoint.Every scan is time-stampedand cannot be forged.3Shift handoverThe incoming guard readshis own guard key — thewhole shift is accountableby name.4Upload & reportsAfter the patrol, place thereader on the communicationbase and extract the data inthe software manually.Managers get route, time,personnel and eventreports.Routine uploads daily or weekly — managers can review patrol history at any time
1
Shift start

The guard reads his own guard key to record identity and shift start time.

2
Patrol the route

Along the route, the reader senses each checkpoint. Every scan is time-stamped and cannot be forged.

3
Shift handover

The incoming guard reads his own guard key — the whole shift is accountable by name.

4
Upload & reports

After the patrol, place the reader on the communication base and extract the data in the software manually. Managers get route, time, personnel and event reports.

What's in the system

One order = a complete working patrol system. Quantities are sized to your site.

Guard Tour ReaderWM-5000V81 per system minimum — usually 2 or more
Data DownloaderWM-5000T81 per system
Checkpoint buttonsWM-2.4GC long-range (2.4G)At least 10 per system — usually 50 or more
Guard Keys (personnel buttons)WM-226/EM1 per guard
Guard tour management System1 per system
Incident walletIW08RFOptional — 0, 1 or several

Checkpoint buttons and guard keys

Everything above is the reader and the software. These two parts are what is actually screwed to the wall and carried in a pocket — and they decide whether the records are worth anything.

WM-226 RFID guard key on a keyring being read by the guard tour reader
Guard key · WM-226

RFID guard key

One per guard. Every round he logs is stamped with this tag — the same route, but now the record says who walked it.

  • ✓Passive 125 kHz tag in a yellow keyring fob: clip it to a belt loop or lanyard, nothing to charge.
  • ✓36 × 28 × 6 mm — small enough to carry all shift without noticing.
  • ✓The serial is fixed in the chip, so one guard cannot lend his key to a colleague and have it read as his own round.
  • ✓Lost or broken? Issue a new key and bind it to the same guard — the checkpoints stay where they are.
Frequency125 kHz
TypePassive, read-only
Size36 × 28 × 6 mm
HousingYellow keyring fob
Weight3.8 g
IDFixed serial, not rewritable

Request a Quotation

Fill in your details and we will reply with pricing and configuration advice.

Fields marked * are required. We respect your privacy. Your information is used only to respond to your inquiry.

Related Products

WM-5000V+ super rugged RFID guard tour reader, front, side and back views
WM-5000V+

Super Rugged RFID Guard Tour System

Super rugged sealed RFID guard tour reader with 60,000-record capacity

RFID
View Details
WM-5000V5 RFID guard tour reader, front view
WM-5000V5

RFID Guard Tour System

Military-grade RFID guard tour reader, IP67, 60,000 records

RFID
View Details
WM-5000V4 RFID guard tour reader with OLED screen, front view
WM-5000V4

RFID Guard Tour System with Flashlight

RFID guard tour reader with OLED screen, flashlight, compass & thermometer

RFIDFlashlight
View Details
FAQ

Frequently Asked Questions

Practical answers about guard tour readers, selection and deployment.

What does the WM-5000V8 (2.4G) include, and which parts are paid?
The WM-5000V8 (2.4G) is a complete guard tour system: guard tour reader, its data downloader or USB data cable (see the What-is-in-the-system table on this page), checkpoint buttons, guard Keys and the Guard tour management System (Windows) — each quoted as a separate paid item so you buy only what you need. Every reader ships with one carrying pouch and one charger (one per reader; extra pouches or chargers are optional paid accessories), and one data cable per system. Checkpoint buttons are sized per patrol route and guard Keys per guard.
What warranty does the WM-5000V8 (2.4G) come with?
Every JWM guard tour reader includes a 6-year warranty, 24-hour response and free Guard tour management System upgrades.
Can the WM-5000V8 (2.4G) be OEM or custom branded?
Yes. We provide white-label and custom guard tour readers with your logo, firmware and packaging; finished products from 1 unit.
Is the WM-5000V8 (2.4G) waterproof, shockproof and tamper-proof?
Yes. Every JWM reader is sealed against water and dust, rated -40°C to +85°C, and built drop- and tamper-resistant with rubber-jacket and multi-layer silicone cushioning; patrol data is retained for over 20 years. See the Specifications table for each model’s exact rating.
Is the WM-5000V8 (2.4G) in stock, and how fast do you ship?
Yes — regular models are in stock for orders up to 500 sets. We ship within 3 working days after payment via FedEx, DHL or UPS, and delivery takes about 5-8 working days worldwide. Shipments are DDU: the consignee may need to support import clearance and pay import duties. LOGO-customized orders are quoted after we confirm the customization details.
What is the read distance of the WM-5000V8 (2.4G)?
Depending on the model, RFID read distance is 3-5 cm contactless, or up to about 30 m with 2.4G long-range checkpoint buttons.
Which cards does the WM-5000V8 (2.4G) read?
It reads EM (125 KHz) cards; dual-mode models also read 2.4G checkpoint buttons.
Can the WM-5000V8 (2.4G) read checkpoints from a distance, without stopping?
Standard EM checkpoint buttons are read from 3-5 cm. Models fitted with 2.4G long-range checkpoint buttons (WM-5000V6, WM-5000V8 2.4G) read from up to about 30 m — ideal for fences, gates and vehicle patrol.
How is the WM-5000V8 2.4G different from the standard WM-5000V8?
Same dual-mode reader, but this bundle pairs it with long-range 2.4G checkpoint buttons readable from up to about 30 m — built for gates, yards and vehicle patrol.
Do the 2.4G checkpoint buttons need power?
Yes — each 2.4G checkpoint button carries an 850 mAh cell that lasts over 2 years in outdoor conditions.
Which checkpoints can the WM-5000V8 2.4G read?
Both: standard 125 KHz EM checkpoint buttons at close range, and WM-2.4GC long-range buttons from up to ~30 m.
How are checkpoint IDs registered on the WM-5000V8 2.4G?
The WM-5000T8 smart Data Downloader batch-imports checkpoint IDs, speeding up route setup.