WM-5000V+ super rugged RFID guard tour reader, front, side and back views

WM-5000V+ super rugged RFID guard tour reader, angled view showing the JWM badge

WM-5000V+ RFID guard tour reader USB port with the USB transmit Cable

WM-5000V+ super rugged RFID guard tour readers — pair of units

WM-30A RFID checkpoint buttons that mark each patrol point

WM-30A RFID checkpoint button fixed to a post with a single screw, being read

WM-226 RFID guard keys (personnel tags) on keyrings, one per guard

RFID60,000 recordsWaterproofDustproofShockproofEasy to use

WM-5000V+ Super Rugged RFID Guard Tour System

Name: WM-5000V+ Super Rugged RFID Guard Tour System
Brand: JWM
SKU: WM-5000V+
Availability: InStock

Super rugged sealed RFID guard tour reader with 60,000-record capacity

The WM-5000V+ is a super rugged RFID guard tour reader built as a rubber jacket over a metal core. Keyless auto-sensing reads EM-card checkpoint buttons on approach, and a sealed, dust-proof housing with over-voltage, over-current, lightning and static protection keeps it working where other readers fail. It stores 60,000 records with low power consumption, and patrol data is retained for over 20 years. Data is offloaded to the Guard tour management System with the USB transmit Cable.

Inquire Now

Are you facing these problems too?

Do you have guards on patrol at your site — and any way to prove they actually walked every route?
At 2 a.m., is he really patrolling — or asleep in a corner? Without a record, you simply cannot tell.
Touching every point one by one is slow on long routes — read at a wave and keep walking, so nobody rushes the round.

Is this the right system for you?

Your indoor routes are long and stopping to touch every point wastes time.
This is your first patrol system and you want the easiest type to run.
Your budget is tight but the records must still be real.

Applications

Security Service Companies

Give every client a timestamped patrol record — the proof that renews contracts.

Factories & Warehouses

Enforce routine equipment and perimeter checks; prove compliance with audit-ready reports.

Property & Campus Security

Stop "one-tap-many" cheating; hold guards accountable for every post, every shift.

Schools & Universities

Record campus, dormitory and laboratory rounds — and have proof for parents, boards and inspectors.

Hospitals & Public Safety

Round-the-clock patrol evidence for wards, parking and emergency routes.

Retail & Shopping Malls

Prove opening, closing and loss-prevention rounds across sales floors, back corridors and loading bays.

Utilities, Power & Substations

Enforce inspection rounds on substations, pump houses and remote assets in any weather.

Oil, Gas & Chemical

Intrinsically safe iButton Guard Tour Readers for zones where RF energy is forbidden.

Key Features

✓Rubber jacket over a metal core — rugged, waterproof, shockproof and vibration-proof.
✓Keyless auto-sensing RFID — reads EM-card checkpoint buttons on approach.
✓Sealed, dust-proof housing with over-voltage, over-current, lightning and static protection.
✓Large 60,000-record memory; patrol data retained for over 20 years.
✓Low-power design extends battery and device life; an audible prompt confirms every read.
✓Standard configuration: WM-EV01 checkpoint buttons, WM-EV02 guard Keys, WM-CABLE USB transmit Cable and the Guard tour management System.

Specifications

Operating Temperature	-40°C ~ +85°C
Humidity	10% ~ 90%
Dimensions	107 × 21 mm
Weight	135 g
Power	3.0V
Storage Capacity	60,000 records
Read Time	≤ 0.1 s
Pressure Resistance	100 kgf
Protection Grade	Sealed / Waterproof / Dust-proof
Drop Resistance	2 m onto concrete
Data Retention	20+ years

How this guard tour system works

Shift start

The guard reads his own guard key to record identity and shift start time.

Patrol the route

Along the route, the reader senses each checkpoint. Every scan is time-stamped and cannot be forged.

Shift handover

The incoming guard reads his own guard key — the whole shift is accountable by name.

Upload & reports

After the patrol, connect the reader to the PC with the USB cable and extract the data in the software. Managers get route, time, personnel and event reports.

What's in the system

One order = a complete working patrol system. Quantities are sized to your site.

Guard Tour Reader	WM-5000V+	1 per system minimum — usually 2 or more
USB transmit Cable	WM-CABLE (USB)	1 per system
Checkpoint buttons	WM-30A/EM	At least 10 per system — usually 50 or more
Guard Keys (personnel buttons)	WM-226/EM	1 per guard
Guard tour management System		1 per system
Incident wallet	IW08RF	Optional — 0, 1 or several

Checkpoint buttons and guard keys

Everything above is the reader and the software. These two parts are what is actually screwed to the wall and carried in a pocket — and they decide whether the records are worth anything.

Checkpoint button · WM-30A

RFID checkpoint button

The mark on the wall that each round is proved against. A passive 125 kHz RFID disc — one screw, no battery, nothing to charge or replace.

✓Passive and read-only: no battery, no switch, so nothing goes flat mid-shift.
✓30 mm across, 4 mm thick, fixed by one screw through the centre — a 4 mm hole in the wall, or adhesive where the surface cannot be drilled.
✓Mount it about 1.2 m above the floor and keep it off bare metal — a steel surface detunes the antenna and shortens the read range.
✓Night-glow ring available, so the point is still findable with the torch off.

Frequency	125 kHz ± 6 kHz
Type	Passive, read-only
Size	⌀30 × 4 mm, centre hole ⌀5 mm
Fixing	1 screw, 4 mm hole / adhesive
Reads	over 1,000,000
Service life	over 20 years
Temperature	-40°C ~ +85°C
Weight	2.8 g
Options	Night-glow / anti-metal version for steel surfaces

Guard key · WM-226

RFID guard key

One per guard. Every round he logs is stamped with this tag — the same route, but now the record says who walked it.

✓Passive 125 kHz tag in a yellow keyring fob: clip it to a belt loop or lanyard, nothing to charge.
✓36 × 28 × 6 mm — small enough to carry all shift without noticing.
✓The serial is fixed in the chip, so one guard cannot lend his key to a colleague and have it read as his own round.
✓Lost or broken? Issue a new key and bind it to the same guard — the checkpoints stay where they are.

Frequency	125 kHz
Type	Passive, read-only
Size	36 × 28 × 6 mm
Housing	Yellow keyring fob
Weight	3.8 g
ID	Fixed serial, not rewritable

Request a Quotation

Fill in your details and we will reply with pricing and configuration advice.

Related Products

WM-5000V5

RFID Guard Tour System

Military-grade RFID guard tour reader, IP67, 60,000 records

RFID

View Details

WM-5000V4

RFID Guard Tour System with Flashlight

RFID guard tour reader with OLED screen, flashlight, compass & thermometer

RFIDFlashlight

View Details

WM-5000V4S

RFID Guard Tour System

Compact flashlight RFID guard tour reader, IP67

RFIDFlashlight

View Details

FAQ

Frequently Asked Questions

Practical answers about guard tour readers, selection and deployment.

What does the WM-5000V+ include, and which parts are paid?

The WM-5000V+ is a complete guard tour system: guard tour reader, its data downloader or USB data cable (see the What-is-in-the-system table on this page), checkpoint buttons, guard Keys and the Guard tour management System (Windows) — each quoted as a separate paid item so you buy only what you need. Every reader ships with one carrying pouch and one charger (one per reader; extra pouches or chargers are optional paid accessories), and one data cable per system. Checkpoint buttons are sized per patrol route and guard Keys per guard.

What warranty does the WM-5000V+ come with?

Every JWM guard tour reader includes a 6-year warranty, 24-hour response and free Guard tour management System upgrades.

Can the WM-5000V+ be OEM or custom branded?

Yes. We provide white-label and custom guard tour readers with your logo, firmware and packaging; finished products from 1 unit.

Is the WM-5000V+ waterproof, shockproof and tamper-proof?

Yes. Every JWM reader is sealed against water and dust, rated -40°C to +85°C, and built drop- and tamper-resistant with rubber-jacket and multi-layer silicone cushioning; patrol data is retained for over 20 years. See the Specifications table for each model’s exact rating.

Is the WM-5000V+ in stock, and how fast do you ship?

Yes — regular models are in stock for orders up to 500 sets. We ship within 3 working days after payment via FedEx, DHL or UPS, and delivery takes about 5-8 working days worldwide. Shipments are DDU: the consignee may need to support import clearance and pay import duties. LOGO-customized orders are quoted after we confirm the customization details.

What is the read distance of the WM-5000V+?

Depending on the model, RFID read distance is 3-5 cm contactless, or up to about 30 m with 2.4G long-range checkpoint buttons.

Which cards does the WM-5000V+ read?

It reads EM (125 KHz) cards; dual-mode models also read 2.4G checkpoint buttons.

Can the WM-5000V+ read checkpoints from a distance, without stopping?

Standard EM checkpoint buttons are read from 3-5 cm. Models fitted with 2.4G long-range checkpoint buttons (WM-5000V6, WM-5000V8 2.4G) read from up to about 30 m — ideal for fences, gates and vehicle patrol.

How tough is the WM-5000V+?

It is a rubber jacket over a metal core: it withstands 100 kgf of pressure, a 2 m drop onto concrete, and is waterproof, dust-proof, shock- and vibration-proof.

How many records can the WM-5000V+ store?

60,000 records. Patrol data is retained for over 20 years even without power.

What is included with the WM-5000V+ system?

WM-5000V+ reader, WM-CABLE USB transmit Cable, WM-EV01 checkpoint buttons, WM-EV02 guard Keys and the Guard tour management System. A WM-VB01 night-glow label is optional.

How big and heavy is the WM-5000V+?

107 × 21 mm and 135 g — compact enough for one-hand carry on long routes.

How is data offloaded from the WM-5000V+?

Through the WM-CABLE USB transmit Cable into the Guard tour management System — no separate Data Downloader needed.