We detected your language is . Switch to it? 3s
🇺🇸 English🇨🇳 中文🇪🇸 Español🇫🇷 Français🇵🇹 Português🇩🇪 Deutsch🇦🇪 العربية🇻🇳 Tiếng Việt🇹🇭 ไทย🇲🇾 Bahasa Melayu🇮🇩 Bahasa Indonesia🇮🇳 हिन्दी
WM-5000V4 RFID guard tour reader with OLED screen, front view
WM-5000V4 RFID guard tour reader with OLED screen, front viewWM-5000V4 guard tour reader rotating through 360 degreesWM-5000V4 RFID guard tour reader built-in flashlight in useWM-5000V4 RFID guard tour reader magnetic gold-plated USB transmit CableWM-5000V4 RFID guard tour reader IP67 waterproof near waterWM-30A RFID checkpoint buttons that mark each patrol pointWM-30A RFID checkpoint button fixed to a post with a single screw, being readWM-226 RFID guard keys (personnel tags) on keyrings, one per guard
RFIDFlashlightWaterproofDustproofShockproofEasy to use

WM-5000V4 RFID Guard Tour System with Flashlight

RFID guard tour reader with OLED screen, flashlight, compass & thermometer

The WM-5000V4 integrates an RFID guard tour reader with a high-brightness flashlight, compass, thermometer and OLED display. Patrol staff see read time, device number, storage, temperature and battery at a glance, with about 26 days of battery life. Data is offloaded to the Guard tour management System through the magnetic gold-plated USB cable.

Inquire Now

Are you facing these problems too?

  • Do you have guards on patrol at your site — and any way to prove they actually walked every route?
  • At 2 a.m., is he really patrolling — or asleep in a corner? Without a record, you simply cannot tell.
  • Dark corners are the easiest to skip — a guard with no light will not walk them. A built-in flashlight means the route gets walked, and seen.

Is this the right system for you?

  • Your night-shift security guards carry a flashlight and a guard tour reader — you want one tool instead of two.
  • You have several sites and want the same patrol standard everywhere.
  • You want the proven model that many sites already run — a guard tour reader with a built-in flashlight.

Applications

Factories & Warehouses

Enforce routine equipment and perimeter checks; prove compliance with audit-ready reports.

Utilities, Power & Substations

Enforce inspection rounds on substations, pump houses and remote assets in any weather.

Construction Sites

Guard plant, materials and site perimeter overnight, on sites with no fixed infrastructure.

Property & Campus Security

Stop "one-tap-many" cheating; hold guards accountable for every post, every shift.

Commercial Buildings & Offices

Show landlords and tenants that lobby, lift, stairwell and plant-room rounds were done on time.

Schools & Universities

Record campus, dormitory and laboratory rounds — and have proof for parents, boards and inspectors.

Key Features

  • ✓Auto-sensing RFID — no key, no contact; offloads via the magnetic gold-plated USB cable.
  • ✓Fully waterproof, IP67 sealed housing.
  • ✓HD OLED shows time, number, storage, temperature, compass.
  • ✓Bright LED flashlight for night patrol.
  • ✓Vibration feedback; ~26 days battery on 500 reads/day.

Specifications

Operating Temperature-40°C ~ +85°C
BatteryPolymer lithium-ion
Protection GradeIP67
Read DistanceContactless RFID
Frequency125 KHz

How this guard tour system works

1Shift startThe guard reads his ownguard key to recordidentity and shift starttime.2Patrol the routeAlong the route, the readersenses each checkpoint.Every scan is time-stampedand cannot be forged.3Shift handoverThe incoming guard readshis own guard key — thewhole shift is accountableby name.4Upload & reportsAfter the patrol, connectthe reader to the PC withthe magnetic USB cable andextract the data in thesoftware. Managers getroute, time, personnel andevent reports.Routine uploads daily or weekly — managers can review patrol history at any time
1
Shift start

The guard reads his own guard key to record identity and shift start time.

2
Patrol the route

Along the route, the reader senses each checkpoint. Every scan is time-stamped and cannot be forged.

3
Shift handover

The incoming guard reads his own guard key — the whole shift is accountable by name.

4
Upload & reports

After the patrol, connect the reader to the PC with the magnetic USB cable and extract the data in the software. Managers get route, time, personnel and event reports.

What's in the system

One order = a complete working patrol system. Quantities are sized to your site.

Guard Tour ReaderWM-5000V41 per system minimum — usually 2 or more
USB transmit CableMagnetic gold-plated USB cable1 per system
Checkpoint buttonsWM-30A/EMAt least 10 per system — usually 50 or more
Guard Keys (personnel buttons)WM-226/EM1 per guard
Guard tour management System1 per system
Incident walletIW08RFOptional — 0, 1 or several

Checkpoint buttons and guard keys

Everything above is the reader and the software. These two parts are what is actually screwed to the wall and carried in a pocket — and they decide whether the records are worth anything.

WM-30A RFID checkpoint button fixed to a post with a single screw, being read
Checkpoint button · WM-30A

RFID checkpoint button

The mark on the wall that each round is proved against. A passive 125 kHz RFID disc — one screw, no battery, nothing to charge or replace.

  • ✓Passive and read-only: no battery, no switch, so nothing goes flat mid-shift.
  • ✓30 mm across, 4 mm thick, fixed by one screw through the centre — a 4 mm hole in the wall, or adhesive where the surface cannot be drilled.
  • ✓Mount it about 1.2 m above the floor and keep it off bare metal — a steel surface detunes the antenna and shortens the read range.
  • ✓Night-glow ring available, so the point is still findable with the torch off.
Frequency125 kHz ± 6 kHz
TypePassive, read-only
Size⌀30 × 4 mm, centre hole ⌀5 mm
Fixing1 screw, 4 mm hole / adhesive
Readsover 1,000,000
Service lifeover 20 years
Temperature-40°C ~ +85°C
Weight2.8 g
OptionsNight-glow / anti-metal version for steel surfaces
WM-226 RFID guard key on a keyring being read by the guard tour reader
Guard key · WM-226

RFID guard key

One per guard. Every round he logs is stamped with this tag — the same route, but now the record says who walked it.

  • ✓Passive 125 kHz tag in a yellow keyring fob: clip it to a belt loop or lanyard, nothing to charge.
  • ✓36 × 28 × 6 mm — small enough to carry all shift without noticing.
  • ✓The serial is fixed in the chip, so one guard cannot lend his key to a colleague and have it read as his own round.
  • ✓Lost or broken? Issue a new key and bind it to the same guard — the checkpoints stay where they are.
Frequency125 kHz
TypePassive, read-only
Size36 × 28 × 6 mm
HousingYellow keyring fob
Weight3.8 g
IDFixed serial, not rewritable

Request a Quotation

Fill in your details and we will reply with pricing and configuration advice.

Fields marked * are required. We respect your privacy. Your information is used only to respond to your inquiry.

Related Products

WM-5000V+ super rugged RFID guard tour reader, front, side and back views
WM-5000V+

Super Rugged RFID Guard Tour System

Super rugged sealed RFID guard tour reader with 60,000-record capacity

RFID
View Details
WM-5000V5 RFID guard tour reader, front view
WM-5000V5

RFID Guard Tour System

Military-grade RFID guard tour reader, IP67, 60,000 records

RFID
View Details
WM-5000V4S RFID guard tour reader, front view
WM-5000V4S

RFID Guard Tour System

Compact flashlight RFID guard tour reader, IP67

RFIDFlashlight
View Details
FAQ

Frequently Asked Questions

Practical answers about guard tour readers, selection and deployment.

What does the WM-5000V4 include, and which parts are paid?
The WM-5000V4 is a complete guard tour system: guard tour reader, its data downloader or USB data cable (see the What-is-in-the-system table on this page), checkpoint buttons, guard Keys and the Guard tour management System (Windows) — each quoted as a separate paid item so you buy only what you need. Every reader ships with one carrying pouch and one charger (one per reader; extra pouches or chargers are optional paid accessories), and one data cable per system. Checkpoint buttons are sized per patrol route and guard Keys per guard.
What warranty does the WM-5000V4 come with?
Every JWM guard tour reader includes a 6-year warranty, 24-hour response and free Guard tour management System upgrades.
Can the WM-5000V4 be OEM or custom branded?
Yes. We provide white-label and custom guard tour readers with your logo, firmware and packaging; finished products from 1 unit.
Is the WM-5000V4 waterproof, shockproof and tamper-proof?
Yes. Every JWM reader is sealed against water and dust, rated -40°C to +85°C, and built drop- and tamper-resistant with rubber-jacket and multi-layer silicone cushioning; patrol data is retained for over 20 years. See the Specifications table for each model’s exact rating.
Is the WM-5000V4 in stock, and how fast do you ship?
Yes — regular models are in stock for orders up to 500 sets. We ship within 3 working days after payment via FedEx, DHL or UPS, and delivery takes about 5-8 working days worldwide. Shipments are DDU: the consignee may need to support import clearance and pay import duties. LOGO-customized orders are quoted after we confirm the customization details.
What is the read distance of the WM-5000V4?
Depending on the model, RFID read distance is 3-5 cm contactless, or up to about 30 m with 2.4G long-range checkpoint buttons.
Which cards does the WM-5000V4 read?
It reads EM (125 KHz) cards; dual-mode models also read 2.4G checkpoint buttons.
Can the WM-5000V4 read checkpoints from a distance, without stopping?
Standard EM checkpoint buttons are read from 3-5 cm. Models fitted with 2.4G long-range checkpoint buttons (WM-5000V6, WM-5000V8 2.4G) read from up to about 30 m — ideal for fences, gates and vehicle patrol.
What does the WM-5000V4 OLED screen show?
Read time, device number, storage status, temperature and compass heading — the guard checks everything at a glance without opening the software.
How long does the WM-5000V4 battery last?
About 26 days on 500 reads per day with the polymer lithium-ion battery.
Does the WM-5000V4 have a flashlight?
Yes — a high-brightness LED flashlight is built in, so night-shift guards carry one tool instead of two.
How is data offloaded from the WM-5000V4?
Through the magnetic gold-plated USB cable — waterproof, tamper-proof and driver-free.