We detected your language is . Switch to it? 3s
🇺🇸 English🇨🇳 中文🇪🇸 Español🇫🇷 Français🇵🇹 Português🇩🇪 Deutsch🇦🇪 العربية🇻🇳 Tiếng Việt🇹🇭 ไทย🇲🇾 Bahasa Melayu🇮🇩 Bahasa Indonesia🇮🇳 हिन्दी
WM-5000V6 2.4G RFID guard tour reader, front view
WM-5000V6 2.4G RFID guard tour reader, front viewWM-5000V6 2.4G guard tour reader reading a long-range 2.4G checkpoint buttonWM-30A RFID checkpoint buttons that mark each patrol pointWM-30A RFID checkpoint button fixed to a post with a single screw, being readWM-226 RFID guard keys (personnel tags) on keyrings, one per guard
RFID60,000 recordsWaterproofDustproofShockproofEasy to use

WM-5000V6 2.4G RFID Guard Tour System

2.4G long-range RFID guard tour reader, IP67, ~110 days

The WM-5000V6 adds 2.4G wireless communication to a rugged IP67 RFID guard tour reader, reading long-range checkpoint buttons up to 30 m away. With about 110 days of battery life, it suits large sites and outdoor perimeter patrol.

Inquire Now

Are you facing these problems too?

  • Do you have guards on patrol at your site — and any way to prove they actually walked every route?
  • At 2 a.m., is he really patrolling — or asleep in a corner? Without a record, you simply cannot tell.
  • Fences and far corners are a long walk away — “I could not reach it” becomes the excuse. Long-range reading logs them from metres off.

Is this the right system for you?

  • Some checkpoints are hard to reach — on fences, gates or far corners.
  • You want points read from metres away, without the guard stopping.
  • You want long battery life so the system runs for months unattended.

Applications

Factories & Warehouses

Enforce routine equipment and perimeter checks; prove compliance with audit-ready reports.

Logistics & Distribution Centers

Secure dock doors, yards and high-value storage through every shift change.

Utilities, Power & Substations

Enforce inspection rounds on substations, pump houses and remote assets in any weather.

Construction Sites

Guard plant, materials and site perimeter overnight, on sites with no fixed infrastructure.

Property & Campus Security

Stop "one-tap-many" cheating; hold guards accountable for every post, every shift.

Security Service Companies

Give every client a timestamped patrol record — the proof that renews contracts.

Key Features

  • ✓Auto-sensing RFID with 2.4G wireless Data Downloader.
  • ✓Fully waterproof, IP67 sealed housing.
  • ✓Vibration feedback for noisy environments.
  • ✓Long-range 2.4G checkpoint buttons up to ~30 m.
  • ✓~110 days battery on 500 reads/day.

Specifications

Operating Temperature-40°C ~ +85°C
Storage Capacity60,000 records
BatteryHigh-energy rechargeable
Protection GradeIP67
Read DistanceEM + 2.4G long-range

How this guard tour system works

1Shift startThe guard reads his ownguard key to recordidentity and shift starttime.2Patrol the routeAlong the route, the readersenses each checkpoint.Every scan is time-stampedand cannot be forged.3Shift handoverThe incoming guard readshis own guard key — thewhole shift is accountableby name.4Upload & reportsAfter the patrol, place thereader on the communicationbase and extract the data inthe software manually.Managers get route, time,personnel and eventreports.Routine uploads daily or weekly — managers can review patrol history at any time
1
Shift start

The guard reads his own guard key to record identity and shift start time.

2
Patrol the route

Along the route, the reader senses each checkpoint. Every scan is time-stamped and cannot be forged.

3
Shift handover

The incoming guard reads his own guard key — the whole shift is accountable by name.

4
Upload & reports

After the patrol, place the reader on the communication base and extract the data in the software manually. Managers get route, time, personnel and event reports.

What's in the system

One order = a complete working patrol system. Quantities are sized to your site.

Guard Tour ReaderWM-5000V61 per system minimum — usually 2 or more
Data DownloaderWM-5000T6 (2.4G wireless)1 per system
Checkpoint buttonsWM-2.4GC long-range + WM-30A/EMAt least 10 per system — usually 50 or more
Guard Keys (personnel buttons)WM-226/EM1 per guard
Guard tour management System1 per system
Incident walletIW08RFOptional — 0, 1 or several

Checkpoint buttons and guard keys

Everything above is the reader and the software. These two parts are what is actually screwed to the wall and carried in a pocket — and they decide whether the records are worth anything.

WM-30A RFID checkpoint button fixed to a post with a single screw, being read
Checkpoint button · WM-30A

RFID checkpoint button

The mark on the wall that each round is proved against. A passive 125 kHz RFID disc — one screw, no battery, nothing to charge or replace.

  • ✓Passive and read-only: no battery, no switch, so nothing goes flat mid-shift.
  • ✓30 mm across, 4 mm thick, fixed by one screw through the centre — a 4 mm hole in the wall, or adhesive where the surface cannot be drilled.
  • ✓Mount it about 1.2 m above the floor and keep it off bare metal — a steel surface detunes the antenna and shortens the read range.
  • ✓Night-glow ring available, so the point is still findable with the torch off.
Frequency125 kHz ± 6 kHz
TypePassive, read-only
Size⌀30 × 4 mm, centre hole ⌀5 mm
Fixing1 screw, 4 mm hole / adhesive
Readsover 1,000,000
Service lifeover 20 years
Temperature-40°C ~ +85°C
Weight2.8 g
OptionsNight-glow / anti-metal version for steel surfaces
WM-226 RFID guard key on a keyring being read by the guard tour reader
Guard key · WM-226

RFID guard key

One per guard. Every round he logs is stamped with this tag — the same route, but now the record says who walked it.

  • ✓Passive 125 kHz tag in a yellow keyring fob: clip it to a belt loop or lanyard, nothing to charge.
  • ✓36 × 28 × 6 mm — small enough to carry all shift without noticing.
  • ✓The serial is fixed in the chip, so one guard cannot lend his key to a colleague and have it read as his own round.
  • ✓Lost or broken? Issue a new key and bind it to the same guard — the checkpoints stay where they are.
Frequency125 kHz
TypePassive, read-only
Size36 × 28 × 6 mm
HousingYellow keyring fob
Weight3.8 g
IDFixed serial, not rewritable

Request a Quotation

Fill in your details and we will reply with pricing and configuration advice.

Fields marked * are required. We respect your privacy. Your information is used only to respond to your inquiry.

Related Products

WM-5000V+ super rugged RFID guard tour reader, front, side and back views
WM-5000V+

Super Rugged RFID Guard Tour System

Super rugged sealed RFID guard tour reader with 60,000-record capacity

RFID
View Details
WM-5000V5 RFID guard tour reader, front view
WM-5000V5

RFID Guard Tour System

Military-grade RFID guard tour reader, IP67, 60,000 records

RFID
View Details
WM-5000V4 RFID guard tour reader with OLED screen, front view
WM-5000V4

RFID Guard Tour System with Flashlight

RFID guard tour reader with OLED screen, flashlight, compass & thermometer

RFIDFlashlight
View Details
FAQ

Frequently Asked Questions

Practical answers about guard tour readers, selection and deployment.

What does the WM-5000V6 include, and which parts are paid?
The WM-5000V6 is a complete guard tour system: guard tour reader, its data downloader or USB data cable (see the What-is-in-the-system table on this page), checkpoint buttons, guard Keys and the Guard tour management System (Windows) — each quoted as a separate paid item so you buy only what you need. Every reader ships with one carrying pouch and one charger (one per reader; extra pouches or chargers are optional paid accessories), and one data cable per system. Checkpoint buttons are sized per patrol route and guard Keys per guard.
What warranty does the WM-5000V6 come with?
Every JWM guard tour reader includes a 6-year warranty, 24-hour response and free Guard tour management System upgrades.
Can the WM-5000V6 be OEM or custom branded?
Yes. We provide white-label and custom guard tour readers with your logo, firmware and packaging; finished products from 1 unit.
Is the WM-5000V6 waterproof, shockproof and tamper-proof?
Yes. Every JWM reader is sealed against water and dust, rated -40°C to +85°C, and built drop- and tamper-resistant with rubber-jacket and multi-layer silicone cushioning; patrol data is retained for over 20 years. See the Specifications table for each model’s exact rating.
Is the WM-5000V6 in stock, and how fast do you ship?
Yes — regular models are in stock for orders up to 500 sets. We ship within 3 working days after payment via FedEx, DHL or UPS, and delivery takes about 5-8 working days worldwide. Shipments are DDU: the consignee may need to support import clearance and pay import duties. LOGO-customized orders are quoted after we confirm the customization details.
What is the read distance of the WM-5000V6?
Depending on the model, RFID read distance is 3-5 cm contactless, or up to about 30 m with 2.4G long-range checkpoint buttons.
Which cards does the WM-5000V6 read?
It reads EM (125 KHz) cards; dual-mode models also read 2.4G checkpoint buttons.
Can the WM-5000V6 read checkpoints from a distance, without stopping?
Standard EM checkpoint buttons are read from 3-5 cm. Models fitted with 2.4G long-range checkpoint buttons (WM-5000V6, WM-5000V8 2.4G) read from up to about 30 m — ideal for fences, gates and vehicle patrol.
How far can the WM-5000V6 read?
Standard EM checkpoint buttons from 3-5 cm, plus 2.4G long-range checkpoint buttons from up to about 30 m — fences, gates and far corners can be logged without walking up to them.
How long does the WM-5000V6 battery last?
About 110 days on 500 reads per day — months of unattended operation between charges.
How does the WM-5000V6 transfer data?
Through the WM-5000T6 2.4G wireless Data Downloader — no cable needed.
Who is the WM-5000V6 for?
Large factories, yards, utilities and outdoor perimeters, where some checkpoints are hard to reach on every round.